Instructions for use HOMESTICKERS
How do I place my HOMESTICKERS?
You’ll find full information below about our decorative sticker collections, HOMESTICKERS for walls and HOMESTICKERS for furniture and household electrical units (fixing instructions, technical features, etc.) along with answers to questions that are most frequently asked about these products.
"Acclimatising" the sticker to the room
To make it easier to place the sticker and ensure that it remains flat once it has been affixed, we
recommend that you wait 24 hours before affixing it. This gives it time to adapt to the ambient
temperature in the room. For the best possible effect, we recommend a temperature of approximately
20° C (+/- 5° C). It is also advisable to avoid extreme changes in temperature as this could lead
to the sticker becoming unstuck.
Choosing the surface to which you want to affix your sticker
HOMESTICKERS may be affixed to any clean, smooth, dry surface; ideally painted walls (satin or gloss), varnished
wood, units, doors… Wait at least 4 weeks before affixing a sticker to a freshly painted wall or surface. You can also
affix them to glass (e.g. a window pane) or tiles. However, as these materials have a very smooth surface, the stickers
will adhere to them very firmly and it may be a little more difficult to remove them.
HOMESTICKERS for furniture and household electrical units may be affixed to the surfaces mentioned above, and to
glass, tiles, plastic and painted metal.
For all our stickers:
Materials such as bare concrete, unpainted plaster and plasterboard, silicone surfaces, coated surfaces, roughcast
surfaces, fibreglass wall coverings and matt paint are not suitable.
There is a wide range of wallpapers on the market and these all have different characteristics and qualities. Before
putting up your wallpaper, we strongly recommend that you carry out a test to check that the sticker will adhere
properly and that it won’t tear the paper when you remove it.
Cleaning the chosen surface
Carefully clean the surface on which you intend to affix the sticker, even if it already looks clean. The sticker will not adhere properly to dust, wood shavings or grease.The surface should also be free of all traces of moisture.
Testing the surface for safety’s sake
If you have any doubts about the surface you’re using, we recommend that you cut out a
piece of the sticker sheet on which there is no pattern and stick it to the surface.
Wait 24 hours and check the result (affixing and removal).
Do not affix your sticker close to a heat source as this could affect the properties of the
glue.
Affixing the pattern
Carefully remove each pattern from the sheet and place it on
the surface, without pressing hard, to see whether you like
the positioning.
When you are happy with your composition, stick the patterns
down, using a soft cloth and firm pressure, starting from the
middle of the pattern and working outwards to get rid of
any air bubbles (particularly for HOMESTICKERS for furniture
and household electrical units). Finally, make sure that
edges of the pattern are well stuck down.
Easy to remove
The glue used means that you can remove HOMESTICKERS without damaging the surface. To do this, remove the
HOMESTICKERS carefully.
Download the instructions for use.
If you need any further information, please send an email to our customer services department.
