F.A.Q. HOMESTICKERS®

→ Instructions for use HOMESTICKERS Collector

Clic here for complete instructions for use 

→ ?What type of glue have you used?

We have used a rubber-based glue on our “HOMESTICKERS Collector”.

→ ?Why are “HOMESTICKERS Collector” printed on paper? What are the advantages?

Nouvelles Images is an eco-responsible company. As such, it has chosen to print “HOMESTICKERS Collector” on paper as, once it has been glued, it is energy-recoverable, i.e. unlike vinyl, it can be used to produce energy without emissions of gases or toxic substances. Bearing in mind its thickness, the paper-based sticker is easy to place and hides certain imperfections in the surface (wall, etc.).

→ ?How can I avoid bubbles from appearing when I place the sticker?

Position the pattern carefully and press it down gently with a soft cloth, starting at the centre of the pattern and moving outwards. When you’re happy that there are no more bubbles, press firmly with the soft cloth.

→ ?Some air bubbles appeared while I was affixing the sticker. What do I do?

These are air bubbles that became trapped under the sticker while you were affixing it. Use a soft cloth to get rid of them, starting from the centre of each pattern and moving outwards. If bubbles persist, pierce them carefully with a needle and get rid of the air by pressing hard with a soft cloth.

→ ?Why isn’t my sticker adhering well?

As we saw above, the choice and condition of the surface is very important (smooth, clean and dry). That’s why we suggest that, it you have any doubts, you should carry out a test with a piece of sticker sheet that has no pattern.

→ ?How can I remove the sticker more easily?

If you have applied the sticker to a surface such as glass, we recommend briefly using a hair-dryer (at low heat) at a distance of about 20 cm from the sticker to warm the glue and remove the sticker more easily.

→ ?What do I do to remove any traces of glue left after I’ve removed the sticker?

We suggest you clean them off with white spirit.

Share